Service Solution Check: Maintenance Coverage

Our Service Check program is our promise that your home’s heating and/or cooling systems have been thoroughly inspected and found to be in good working order. It’s important to be comfortable in your home winter and summer, so ask for a Service Check today. Inspection and maintenance of your electronic air cleaner and/or humidifier are available for an additional charge.

Heating

(oil heating inspection not available in some areas)

  • Clean and check gas burners
  • Check pilot light
  • Clean and check pilot tube
  • Check flue baffle
  • Set manifold gas pressure
  • Check gas input
  • Set burner air adjustment
  • Check fan belts, replace as needed
  • Inspect gas valve
  • Check thermocouple, replace as needed
  • Check spark igniter
  • Inspect and clean combustion chamber
  • Check temperature rise
  • Check blower motor and bearings
  • Lubricate blower and bearings
  • Check wiring assembly
  • Check air filters
  • Check all electrical connections
  • Check flue and venting
  • Check fan and limit control
  • Check heat anticipator
  • Check thermostat operation
  • Check voltage and amperage
  • Check interlock switch
  • Check and set igniter gap
  • Brush and vacuum heat exchanger
  • Check oil circulator – boiler only
  • Drain expansion tank – boiler only
  • Replace oil filter – oil only
  • Check oil pump pressure – oil only
  • Clean and replace nozzle – oil only
  • Check and adjust electrodes – oil only
  • Remove brush and vacuum flue assembly – oil only
  • Check CAD cell and clean CAD cell eye – oil only
  • Check safety controls
  • Perform final operations check
  • Check expansion valve
  • Inspect and clean evaporator drain, install blowout tee as needed
  • Check humidifier dampers
  • Check thermostat operation
  • Check thermostat selector
  • Check circuit breakers/fuses – outside
  • Check temperature rise/drop across coils
  • Check condenser coil (chemical cleaning extra)
  • Check fins on outside unit
  • Check and oil condenser fan motor
  • Check voltage and amperage
  • Check fan blades for tightness
  • Check start, run relays and connections
  • Check wiring assembly
  • Check all electrical connections & components
  • Check head pressure & components
  • Check freon lines
  • Check all air handler control components
  • Check and oil blower motor
  • Check operating pressure
  • Check auxiliary heat – heat pump only
  • Check reversing valve – heat pump only
  • Check crankcase heater – heat pump only
  • Check defrost operation – heat pump only
  • Check condition of accumulator – heat pump / air conditioning
  • Check superheat for fixed orifice systems
  • Check subcooling for TXV systems
  • Check air filters
  • Check safety controls
  • Perform final operation check